Bug#879624: xorg: After upgrade to buster: system doesnt start x-server anymore but stop reacting

[olar_epbu]

Package: xorg
Version: 1:7.7+19
Severity: grave
Tags: d-i
Justification: renders package unusable

Dear Maintainer,

After i upgraded my software pacage and the system from stretch to buster I can not start the x-server anymore.
When booting in normal mode the system hangs after outputting a few lines about an achi operator problem and notifiing me that linux is clear. I can not input anything, but the cursor blinks.
When i boot in resque mode, my laptop( x1 carbon) behaves quite normal. I can login and connect to internet via cable. But once I enter startx or xinit, the computer hangs again.

Thank you

-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09)

/etc/X11/xorg.conf does not exist.

/etc/X11/xorg.conf.d does not exist.

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 4.13.0-1-amd64 (debian-***@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 30821 Oct 11 13:26 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 30824 Oct 20 14:15 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 5765 Oct 20 19:05 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 699.483]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 699.484] X Protocol Version 11, Revision 0
[ 699.484] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[ 699.485] Current Operating System: Linux carbon 4.13.0-1-amd64 #1 SMP Debian 4.13.4-2 (2017-10-15) x86_64
[ 699.485] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=c4e5a1a2-ec30-47c7-ba73-ea995c5804fb ro single
[ 699.485] Build Date: 16 October 2017 12:28:38PM
[ 699.485] xorg-server 2:1.19.5-1 (https://www.debian.org/support)
[ 699.486] Current version of pixman: 0.34.0
[ 699.486] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 699.486] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 699.488] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 20 19:05:31 2017
[ 699.489] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 699.491] (==) No Layout section. Using the first Screen section.
[ 699.491] (==) No screen section available. Using defaults.
[ 699.491] (**) |-->Screen "Default Screen Section" (0)
[ 699.491] (**) | |-->Monitor "<default monitor>"
[ 699.491] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 699.491] (==) Automatically adding devices
[ 699.491] (==) Automatically enabling devices
[ 699.491] (==) Automatically adding GPU devices
[ 699.492] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 699.494] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 699.494] Entry deleted from font path.
[ 699.496] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 699.496] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 699.496] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 699.496] (II) Loader magic: 0x564182b02de0
[ 699.496] (II) Module ABI versions:
[ 699.496] X.Org ANSI C Emulation: 0.4
[ 699.496] X.Org Video Driver: 23.0
[ 699.496] X.Org XInput driver : 24.1
[ 699.496] X.Org Server Extension : 10.0
[ 699.497] (--) using VT number 2

[ 699.497] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 699.497] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 699.504] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2227 rev 9, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 699.504] (II) LoadModule: "glx"
[ 699.506] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 699.515] (II) Module glx: vendor="X.Org Foundation"
[ 699.515] compiled for 1.19.5, module version = 1.0.0
[ 699.515] ABI class: X.Org Server Extension, version 10.0
[ 699.515] (==) Matched modesetting as autoconfigured driver 0
[ 699.515] (==) Matched fbdev as autoconfigured driver 1
[ 699.515] (==) Matched vesa as autoconfigured driver 2
[ 699.515] (==) Assigned the driver to the xf86ConfigLayout
[ 699.515] (II) LoadModule: "modesetting"
[ 699.516] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 699.517] (II) Module modesetting: vendor="X.Org Foundation"
[ 699.517] compiled for 1.19.5, module version = 1.19.5
[ 699.517] Module class: X.Org Video Driver
[ 699.517] ABI class: X.Org Video Driver, version 23.0
[ 699.517] (II) LoadModule: "fbdev"
[ 699.517] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 699.518] (II) Module fbdev: vendor="X.Org Foundation"
[ 699.518] compiled for 1.19.0, module version = 0.4.4
[ 699.518] Module class: X.Org Video Driver
[ 699.518] ABI class: X.Org Video Driver, version 23.0
[ 699.518] (II) LoadModule: "vesa"
[ 699.518] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 699.519] (II) Module vesa: vendor="X.Org Foundation"
[ 699.519] compiled for 1.19.0, module version = 2.3.4
[ 699.519] Module class: X.Org Video Driver
[ 699.519] ABI class: X.Org Video Driver, version 23.0
[ 699.519] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 699.519] (II) FBDEV: driver for framebuffer: fbdev
[ 699.519] (II) VESA: driver for VESA chipsets: vesa
[ 699.536] (II) modeset(0): using drv /dev/dri/card0
[ 699.536] (WW) Falling back to old probe method for fbdev
[ 699.536] (II) Loading sub module "fbdevhw"
[ 699.536] (II) LoadModule: "fbdevhw"
[ 699.536] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 699.537] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 699.537] compiled for 1.19.5, module version = 0.0.2
[ 699.537] ABI class: X.Org Video Driver, version 23.0
[ 699.537] (WW) Falling back to old probe method for vesa
[ 699.537] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 699.537] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 699.537] (==) modeset(0): RGB weight 888
[ 699.537] (==) modeset(0): Default visual is TrueColor
[ 699.537] (II) Loading sub module "glamoregl"
[ 699.537] (II) LoadModule: "glamoregl"
[ 699.537] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 699.544] (II) Module glamoregl: vendor="X.Org Foundation"
[ 699.544] compiled for 1.19.5, module version = 1.0.0
[ 699.544] ABI class: X.Org ANSI C Emulation, version 0.4
[ 699.544] (II) glamor: OpenGL accelerated X.org driver based.

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3850514

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3981921
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3930914

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3987365
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=3850318

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=reliable
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3981037

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3851305

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3982788
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5045310

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14/event13
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5097903

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5042762

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15/event14
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5083040

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5043318

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16/event15
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5088271

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5046135

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5108246

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=10"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5044399

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18/event17
N: input/event17
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18/event17
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5097902

P: /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input13
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input13
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_8_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=b45d
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0029
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Integrated_Camera_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB45De0029-e0,1,kD4,ramlsfw
E: NAME="Integrated Camera: Integrated C"
E: PHYS="usb-0000:00:14.0-8/button"
E: PRODUCT=3/4f2/b45d/29
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5301510

P: /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input13/event12
N: input/event12
S: input/by-id/usb-Chicony_Electronics_Co._Ltd._Integrated_Camera_0x0001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event /dev/input/by-id/usb-Chicony_Electronics_Co._Ltd._Integrated_Camera_0x0001-event-if00
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input13/event12
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=b45d
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0029
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Integrated_Camera_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: LIBINPUT_DEVICE_GROUP=3/4f2/b45d/29:usb-0000:00:14.0-8/button
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5340066
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=3976862

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event10
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4038539

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=3981606

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event11
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4034488

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0292e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/10ec/292/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3945127

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/10ec/292/1:card1/codec#0/beep0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3994971

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1485846

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_ATTR_KEYBOARD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab54:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3980637
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio1/input/input2
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2393304

P: /devices/platform/i8042/serio1/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=53
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=98
E: LIBINPUT_DEVICE_GROUP=11/2/7/1b1:isa0060/serio1
E: LIBINPUT_MODEL_LENOVO_T450_TOUCHPAD=1
E: LIBINPUT_MODEL_SYNAPTICS_SERIAL_TOUCHPAD=1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3990223

P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3834791

P: /devices/platform/i8042/serio1/serio2/input/input3
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3
E: EV=7
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ae0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="TPPS/2 IBM TrackPoint"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/a/0
E: PROP=21
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3285643

P: /devices/platform/i8042/serio1/serio2/input/input3/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3/event2
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: LIBINPUT_DEVICE_GROUP=11/2/a/0:synaptics-pt/serio0
E: MAJOR=13
E: MINOR=66
E: POINTINGSTICK_CONST_ACCEL=1.0
E: POINTINGSTICK_SENSITIVITY=200
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3981696

P: /devices/platform/i8042/serio1/serio2/input/input3/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3839618

P: /devices/platform/pcspkr/input/input8
E: DEVPATH=/devices/platform/pcspkr/input/input8
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3906641

P: /devices/platform/pcspkr/input/input8/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input8/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3982883

P: /devices/platform/thinkpad_acpi/input/input7
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input7
E: EV=33
E: ID_FOR_SEAT=input-platform-thinkpad_acpi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEY=10040 0 18040000 0 50100000000000 0 1701b02102004 c000280041114000 10e000000000000 0
E: MODALIAS=input:b0019v17AAp5054e4101-e0,1,4,5,k71,72,73,78,8E,90,94,98,9E,AB,AD,BE,BF,C2,CD,D4,D9,E0,E1,E3,E4,EC,ED,EE,F0,16C,174,176,1D2,1DB,1DC,246,250,ram4,lsfw3,
E: MSC=10
E: NAME="ThinkPad Extra Buttons"
E: PHYS="thinkpad_acpi/input0"
E: PRODUCT=19/17aa/5054/4101
E: PROP=0
E: SUBSYSTEM=input
E: SW=8
E: TAGS=:seat:
E: USEC_INITIALIZED=3908480

P: /devices/platform/thinkpad_acpi/input/input7/event7
N: input/event7
S: input/by-path/platform-thinkpad_acpi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-thinkpad_acpi-event
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input7/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEYBOARD_KEY_01=screenlock
E: KEYBOARD_KEY_02=battery
E: KEYBOARD_KEY_03=sleep
E: KEYBOARD_KEY_04=wlan
E: KEYBOARD_KEY_06=switchvideomode
E: KEYBOARD_KEY_07=f21
E: KEYBOARD_KEY_08=f24
E: KEYBOARD_KEY_0b=suspend
E: KEYBOARD_KEY_0f=brightnessup
E: KEYBOARD_KEY_10=brightnessdown
E: KEYBOARD_KEY_11=kbdillumtoggle
E: KEYBOARD_KEY_13=zoom
E: KEYBOARD_KEY_14=volumeup
E: KEYBOARD_KEY_15=volumedown
E: KEYBOARD_KEY_16=mute
E: KEYBOARD_KEY_17=prog1
E: KEYBOARD_KEY_1a=f20
E: LIBINPUT_DEVICE_GROUP=19/17aa/5054/4101:thinkpad_acpi
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3980829
E: XKBLAYOUT=de
E: XKBMODEL=pc105


DRM Information from dmesg:
---------------------------
[ 1.102778] Linux agpgart interface v0.103
[ 2.136324] ata4.00: supports DRM functions and may not be fully accessible
[ 2.138086] ata4.00: supports DRM functions and may not be fully accessible
[ 3.834805] [drm] Memory usable by graphics device = 4096M
[ 3.834871] [drm] Replacing VGA console driver
[ 3.842500] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.842508] [drm] Driver supports precise vblank timestamp query.
[ 3.887987] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 3.927552] fbcon: inteldrmfb (fb0) is primary device
[ 4.982145] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 5.015246] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device


-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xorg depends on:
ii gnome-terminal [x-terminal-emulator] 3.26.1-1
ii libgl1 0.2.999+git20170802-5
ii libgl1-mesa-dri 17.2.2-1
ii libgl1-mesa-glx 17.2.2-1
ii libglu1-mesa 9.0.0-2.1
ii x11-apps 7.7+6+b1
ii x11-session-utils 7.7+2+b1
ii x11-utils 7.7+3+b1
ii x11-xkb-utils 7.7+3+b1
ii x11-xserver-utils 7.7+7+b1
ii xauth 1:1.0.9-1+b2
ii xfce4-terminal [x-terminal-emulator] 0.8.6-1
ii xfonts-100dpi 1:1.0.4+nmu1
ii xfonts-75dpi 1:1.0.4+nmu1
ii xfonts-base 1:1.0.4+nmu1
ii xfonts-scalable 1:1.0.3-1.1
ii xfonts-utils 1:7.7+4
ii xinit 1.3.4-3+b1
ii xkb-data 2.19-1.1
ii xorg-docs-core 1:1.7.1-1.1
ii xserver-xorg 1:7.7+19
ii xterm [x-terminal-emulator] 330-1

xorg recommends no packages.

Versions of packages xorg suggests:
pn x11-xfs-utils <none>
pn xorg-docs <none>

Versions of packages xserver-xorg depends on:
ii x11-xkb-utils 7.7+3+b1
ii xkb-data 2.19-1.1
ii xserver-xorg-core 2:1.19.5-1
ii xserver-xorg-input-all 1:7.7+19
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.10.5-1
ii xserver-xorg-input-libinput [xorg-driver-input] 0.26.0-1
ii xserver-xorg-input-mtrack [xorg-driver-input] 0.3.1-1+b2
ii xserver-xorg-input-mutouch [xorg-driver-input] 1:1.3.0-1+b7
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.9.0-1+b1
ii xserver-xorg-input-void [xorg-driver-input] 1:1.4.1-1+b2
ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1
ii xserver-xorg-video-all 1:7.7+19
ii xserver-xorg-video-amdgpu [xorg-driver-video] 1.4.0-1
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-dummy [xorg-driver-video] 1:0.3.8-1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b5
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.99.917+git20161206-1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.15-2
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.5-2
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.4-1+b2
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.2.1-1+b1

Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 17.2.2-1
ii xserver-xorg-legacy 2:1.19.5-1

-- no debconf information

[Michael Hanke]

Hi,

same here, after upgrade to buster no X anymore. Normal start works, but
ends at terminal login. Manual startx makes the screen flicker briefly,
then back to terminal. X log contain no errors (EE).

Downgrade to stretch didn't change the situation in any way. Going back
from linux 4.13 to 4.8 had no effect either.

During downgrade gconf2 choked (triggers hung and never completed). During
upgrade I think I saw some gconf error message too, but I cannot find a
trace of them anywhere.

Any advice would be highly appreciated.

Thanks in advance

Michael

[Michael Hanke]

Update:

I stopped the gdm3 service and started a freshly installed slim login
manager. I comes right up, no issues.

Starting the GNOME session from slim, however, results in immediate
failure. This is syslog from the last message of slim to the X server
shutdown:

Nov 4 09:49:56 meiner slim[8940]: /usr/bin/X11/xauth: file
/home/mih/.Xauthority does not exist
Nov 4 09:49:56 meiner org.a11y.Bus[9347]: Activating service
name='org.a11y.atspi.Registry'
Nov 4 09:49:56 meiner org.a11y.Bus[9347]: Successfully activated
service 'org.a11y.atspi.Registry'
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: SpiRegistry
daemon is running with well-known name - org.a11y.atspi.Registry
Nov 4 09:49:56 meiner gnome-terminal-[9379]: gnome-terminal-server:
Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: XIO: fatal IO
error 11 (Resource temporarily unavailable) on X server ":0.0"
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: after 21
requests (19 known processed) with 0 events remaining.
Nov 4 09:49:56 meiner org.gtk.vfs.Daemon[9347]: A connection to the
bus can't be made
Nov 4 09:49:58 meiner kernel: [ 249.268908] [drm] Reducing the
compressed framebuffer size. This may lead to less power savings than
a non-reduced-size. Try to increase stolen memory size if available in
BIOS.
Nov 4 09:49:58 meiner slim[8940]: (II) Server terminated successfully
(0). Closing log file.

Post by Michael Hanke
Hi,
same here, after upgrade to buster no X anymore. Normal start works, but
ends at terminal login. Manual startx makes the screen flicker briefly, then
back to terminal. X log contain no errors (EE).
Downgrade to stretch didn't change the situation in any way. Going back from
linux 4.13 to 4.8 had no effect either.
During downgrade gconf2 choked (triggers hung and never completed). During
upgrade I think I saw some gconf error message too, but I cannot find a
trace of them anywhere.
Any advice would be highly appreciated.
Thanks in advance
Michael

[Michael Hanke]

Looking into possible known issues for at-spi or gnome-terminal-server
did not bring up anything useful for me.

FTR: Installing xfce4 or kde both gives me a working desktop. So this
might actually be a GNOME issue rather than an X issue, or an
interaction of the two.

Post by Michael Hanke
I stopped the gdm3 service and started a freshly installed slim login
manager. I comes right up, no issues.
Starting the GNOME session from slim, however, results in immediate
failure. This is syslog from the last message of slim to the X server
Nov 4 09:49:56 meiner slim[8940]: /usr/bin/X11/xauth: file
/home/mih/.Xauthority does not exist
Nov 4 09:49:56 meiner org.a11y.Bus[9347]: Activating service
name='org.a11y.atspi.Registry'
Nov 4 09:49:56 meiner org.a11y.Bus[9347]: Successfully activated
service 'org.a11y.atspi.Registry'
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: SpiRegistry
daemon is running with well-known name - org.a11y.atspi.Registry
Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: XIO: fatal IO
error 11 (Resource temporarily unavailable) on X server ":0.0"
Nov 4 09:49:56 meiner org.a11y.atspi.Registry[9373]: after 21
requests (19 known processed) with 0 events remaining.
Nov 4 09:49:56 meiner org.gtk.vfs.Daemon[9347]: A connection to the
bus can't be made
Nov 4 09:49:58 meiner kernel: [ 249.268908] [drm] Reducing the
compressed framebuffer size. This may lead to less power savings than
a non-reduced-size. Try to increase stolen memory size if available in
BIOS.
Nov 4 09:49:58 meiner slim[8940]: (II) Server terminated successfully
(0). Closing log file.

Post by Michael Hanke
Hi,
same here, after upgrade to buster no X anymore. Normal start works, but
ends at terminal login. Manual startx makes the screen flicker briefly, then
back to terminal. X log contain no errors (EE).
Downgrade to stretch didn't change the situation in any way. Going back from
linux 4.13 to 4.8 had no effect either.
During downgrade gconf2 choked (triggers hung and never completed). During
upgrade I think I saw some gconf error message too, but I cannot find a
trace of them anywhere.
Any advice would be highly appreciated.
Thanks in advance
Michael

--
Michael Hanke
http://psychoinformatics.de

[Vivek Mohan Mallick]

Package: xserver-xorg
Followup-For: Bug #879624

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

* What led up to the situation?
I have an Acer Aspire One D270. Graphics driver was a problem from the
beginning but after sometime in 2013, the problems went away and the
laptop functioned smoothly. I use a stripped down version of the Debian
testing OS without any display-manager. I log into the console and use startx
to start an Xmonad session.

Everything was fine till linux kernel 4.13. Two weeks back, I upgraded
to linux kernel 4.14.0-3. I cannot make X work under the new kernel. It
works fine with the old kernel.

In the new kernel, I get till the console login screen. Everything
works fine in the console. However, as soon I run startx, the screen
goes black with the backlight at its brightest. Nothing comes on the
screen. Trying to switch to console useing Ctrl-Alt-Fn doesn't work for
any n=2,3,4,5,6. The only way is to reboot. I use Ctrl-Alt-F2 followed
by Ctrl-Alt-Delete.

* What exactly did you do (or not do) that was effective (or
ineffective)?
I created an /etc/X11/xorg.conf using Xorg -configure. It crashed
but it created an xorg.conf.new nevertheless. I manually
set the driver to "modesetting".

* What was the outcome of this action?
It works sometimes after a lot of reboots. But not always. I cannot
figure out if there is some pattern as the number of times it works is
very few compared to the number of times it doesn't work.


*** End of the template - remove these template lines ***


-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Apr 24 2017 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Jan 18 17:41 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09)

Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 2017 Feb 4 13:37 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection


/etc/X11/xorg.conf.d does not exist.

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 4.14.0-3-amd64 (debian-***@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1 (2018-01-14)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 13273 Feb 4 13:36 /var/log/Xorg.0.log
-rw-r--r-- 1 testing testing 48342 Feb 4 13:48 /home/testing/.local/share/xorg/Xorg.0.log

Contents of most recent Xorg X server log file (/home/testing/.local/share/xorg/Xorg.0.log):
--------------------------------------------------------------------------------------------
[ 76.534]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 76.538] X Protocol Version 11, Revision 0
[ 76.540] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[ 76.541] Current Operating System: Linux torsor 4.14.0-3-amd64 #1 SMP Debian 4.14.13-1 (2018-01-14) x86_64
[ 76.542] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 root=UUID=e97cb5f9-d185-4c76-a204-8ec1579bdd16 ro
[ 76.545] Build Date: 26 January 2018 04:30:21PM
[ 76.547] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 76.549] Current version of pixman: 0.34.0
[ 76.553] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 76.553] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 76.561] (==) Log file: "/home/testing/.local/share/xorg/Xorg.0.log", Time: Sun Feb 4 13:41:30 2018
[ 76.602] (==) Using config file: "/etc/X11/xorg.conf"
[ 76.604] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 76.679] (==) ServerLayout "X.org Configured"
[ 76.679] (**) |-->Screen "Screen0" (0)
[ 76.679] (**) | |-->Monitor "Monitor0"
[ 76.680] (**) | |-->Device "Card0"
[ 76.680] (**) |-->Input Device "Mouse0"
[ 76.680] (**) |-->Input Device "Keyboard0"
[ 76.680] (==) Automatically adding devices
[ 76.680] (==) Automatically enabling devices
[ 76.680] (==) Automatically adding GPU devices
[ 76.680] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 76.758] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 76.758] Entry deleted from font path.
[ 76.897] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 76.897] Entry deleted from font path.
[ 76.897] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 76.897] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 76.897] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 76.897] (WW) Disabling Mouse0
[ 76.897] (WW) Disabling Keyboard0
[ 76.913] (II) Loader magic: 0x5601a1db7de0
[ 76.914] (II) Module ABI versions:
[ 76.914] X.Org ANSI C Emulation: 0.4
[ 76.914] X.Org Video Driver: 23.0
[ 76.914] X.Org XInput driver : 24.1
[ 76.914] X.Org Server Extension : 10.0
[ 76.917] (++) using VT number 1

[ 76.923] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 76.926] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 76.929] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 76.934] (--) PCI:*(0:0:2:0) 8086:0be1:1025:061f rev 9, Mem @ 0x46000000/1048576, I/O @ 0x000050d0/8, BIOS @ 0x????????/131072
[ 76.935] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 76.935] (II) LoadModule: "glx"
[ 77.016] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 77.111] (II) Module glx: vendor="X.Org Foundation"
[ 77.111] compiled for 1.19.6, module version = 1.0.0
[ 77.111] ABI class: X.Org Server Extension, version 10.0
[ 77.111] (II) LoadModule: "modesetting"
[ 77.157] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 77.179] (II) Module modesetting: vendor="X.Org Foundation"
[ 77.179] compiled for 1.19.6, module version = 1.19.6
[ 77.179] Module class: X.Org Video Driver
[ 77.179] ABI class: X.Org Video Driver, version 23.0
[ 77.179] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 77.180] (II) modeset(0): using drv /dev/dri/card0
[ 77.180] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 77.180] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 77.181] (==) modeset(0): RGB weight 888
[ 77.181] (==) modeset(0): Default visual is TrueColor
[ 77.181] (II) Loading sub module "glamoregl"
[ 77.181] (II) LoadModule: "glamoregl"
[ 77.181] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 77.295] (II) Module glamoregl: vendor="X.Org Foundation"
[ 77.295] compiled for 1.19.6, module version = 1.0.0
[ 77.295] ABI class: X.Org ANSI C Emulation, version 0.4
[ 77.295] (II) glamor: OpenGL accelerated X.org driver based.
[ 79.546] (II) glamor: EGL version 1.4 (DRI2):
[ 79.546] EGL_MESA_drm_image required.
[ 79.548] (EE) modeset(0): glamor initialization failed
[ 79.548] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[ 79.572] (II) modeset(0): Output VGA-1 using monitor section Monitor0
[ 79.636] (II) modeset(0): Output LVDS-1 has no monitor section
[ 79.640] (II) modeset(0): Output DVI-D-1 has no monitor section
[ 79.641] (II) modeset(0): Output DP-1 has no monitor section
[ 79.664] (II) modeset(0): EDID for output VGA-1
[ 79.728] (II) modeset(0): EDID for output LVDS-1
[ 79.728] (II) modeset(0): Manufacturer: AUO Model: 61d2 Serial#: 0
[ 79.728] (II) modeset(0): Year: 2009 Week: 0
[ 79.728] (II) modeset(0): EDID Version: 1.3
[ 79.728] (II) modeset(0): Digital Display Input
[ 79.728] (II) modeset(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 79.728] (II) modeset(0): Gamma: 2.20
[ 79.728] (II) modeset(0): No DPMS capabilities specified
[ 79.728] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 79.728] (II) modeset(0): First detailed timing is preferred mode
[ 79.728] (II) modeset(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 79.728] (II) modeset(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 79.728] (II) modeset(0): Manufacturer's mask: 0
[ 79.728] (II) modeset(0): Supported detailed timing:
[ 79.728] (II) modeset(0): clock: 49.8 MHz Image Size: 222 x 125 mm
[ 79.728] (II) modeset(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1338 h_border: 0
[ 79.728] (II) modeset(0): v_active: 600 v_sync: 602 v_sync_end 608 v_blanking: 620 v_border: 0
[ 79.728] (II) modeset(0): Unknown vendor-specific block f
[ 79.728] (II) modeset(0): AUO
[ 79.729] (II) modeset(0): B101AW06 V1
[ 79.729] (II) modeset(0): EDID (in hex):
[ 79.729] (II) modeset(0): 00ffffffffffff0006afd26100000000
[ 79.729] (II) modeset(0): 0013010380160d780a15859758538a26
[ 79.729] (II) modeset(0): 25505400000001010101010101010101
[ 79.729] (II) modeset(0): 0101010101017413003a415814203020
[ 79.729] (II) modeset(0): 2600de7d000000180000000f00000000
[ 79.729] (II) modeset(0): 00000000000000000020000000fe0041
[ 79.729] (II) modeset(0): 554f0a202020202020202020000000fe
[ 79.729] (II) modeset(0): 004231303141573036205631200a0029
[ 79.729] (II) modeset(0): Printing probed modes for output LVDS-1
[ 79.729] (II) modeset(0): Modeline "1024x600"x60.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 79.729] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 79.729] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 79.730] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 79.730] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 79.730] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 79.730] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 79.730] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 79.730] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 79.735] (II) modeset(0): EDID for output DVI-D-1
[ 79.735] (II) modeset(0): EDID for output DP-1
[ 79.735] (II) modeset(0): Output VGA-1 disconnected
[ 79.735] (II) modeset(0): Output LVDS-1 connected
[ 79.736] (II) modeset(0): Output DVI-D-1 disconnected
[ 79.736] (II) modeset(0): Output DP-1 disconnected
[ 79.736] (II) modeset(0): Using exact sizes for initial modes
[ 79.736] (II) modeset(0): Output LVDS-1 using initial mode 1024x600 +0+0
[ 79.736] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 79.736] (==) modeset(0): DPI set to (96, 96)
[ 79.736] (II) Loading sub module "fb"
[ 79.736] (II) LoadModule: "fb"
[ 79.849] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 79.876] (II) Module fb: vendor="X.Org Foundation"
[ 79.876] compiled for 1.19.6, module version = 1.0.0
[ 79.876] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.876] (==) Depth 24 pixmap format is 32 bpp
[ 79.878] (==) modeset(0): Backing store enabled
[ 79.878] (==) modeset(0): Silken mouse enabled
[ 79.879] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.880] (==) modeset(0): DPMS enabled
[ 79.880] (--) RandR disabled
[ 79.896] (II) SELinux: Disabled on system
[ 79.898] (II) AIGLX: Screen 0 is not DRI2 capable
[ 79.898] (EE) AIGLX: reverting to software rendering
[ 79.907] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 79.910] (II) IGLX: Loaded and initialized swrast
[ 79.910] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 79.911] (II) modeset(0): Damage tracking initialized
[ 79.911] (II) modeset(0): Setting screen physical size to 270 x 158
[ 80.758] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 80.758] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.758] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 80.758] (II) LoadModule: "libinput"
[ 80.759] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 80.842] (II) Module libinput: vendor="X.Org Foundation"
[ 80.842] compiled for 1.19.3, module version = 0.26.0
[ 80.842] Module class: X.Org XInput Driver
[ 80.842] ABI class: X.Org XInput driver, version 24.1
[ 80.842] (II) Using input driver 'libinput' for 'Power Button'
[ 80.844] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 19 paused 0
[ 80.845] (**) Power Button: always reports core events
[ 80.845] (**) Option "Device" "/dev/input/event7"
[ 80.845] (**) Option "_source" "server/udev"
[ 80.847] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.848] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 80.848] (II) event7 - (II) Power Button: (II) device removed
[ 80.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7"
[ 80.848] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.848] (**) Option "xkb_model" "pc105"
[ 80.848] (**) Option "xkb_layout" "us"
[ 80.851] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.851] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 80.853] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 80.853] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.853] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 80.853] (II) Using input driver 'libinput' for 'Video Bus'
[ 80.856] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 22 paused 0
[ 80.856] (**) Video Bus: always reports core events
[ 80.856] (**) Option "Device" "/dev/input/event10"
[ 80.856] (**) Option "_source" "server/udev"
[ 80.858] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 80.858] (II) event10 - (II) Video Bus: (II) device is a keyboard
[ 80.858] (II) event10 - (II) Video Bus: (II) device removed
[ 80.859] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event10"
[ 80.859] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.859] (**) Option "xkb_model" "pc105"
[ 80.859] (**) Option "xkb_layout" "us"
[ 80.861] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 80.861] (II) event10 - (II) Video Bus: (II) device is a keyboard
[ 80.863] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 80.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.863] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 80.863] (II) Using input driver 'libinput' for 'Power Button'
[ 80.866] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23 paused 0
[ 80.866] (**) Power Button: always reports core events
[ 80.866] (**) Option "Device" "/dev/input/event4"
[ 80.866] (**) Option "_source" "server/udev"
[ 80.868] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.868] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 80.868] (II) event4 - (II) Power Button: (II) device removed
[ 80.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4"
[ 80.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.869] (**) Option "xkb_model" "pc105"
[ 80.869] (**) Option "xkb_layout" "us"
[ 80.871] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.871] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 80.873] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 80.873] (II) No input driver specified, ignoring this device.
[ 80.873] (II) This device may have been added with another device file.
[ 80.874] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 80.874] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.874] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 80.874] (II) Using input driver 'libinput' for 'Sleep Button'
[ 80.877] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 24 paused 0
[ 80.877] (**) Sleep Button: always reports core events
[ 80.877] (**) Option "Device" "/dev/input/event5"
[ 80.877] (**) Option "_source" "server/udev"
[ 80.879] (II) event5 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 80.880] (II) event5 - (II) Sleep Button: (II) device is a keyboard
[ 80.880] (II) event5 - (II) Sleep Button: (II) device removed
[ 80.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5"
[ 80.880] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.880] (**) Option "xkb_model" "pc105"
[ 80.880] (**) Option "xkb_layout" "us"
[ 80.882] (II) event5 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 80.882] (II) event5 - (II) Sleep Button: (II) device is a keyboard
[ 80.885] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event13)
[ 80.885] (II) No input driver specified, ignoring this device.
[ 80.885] (II) This device may have been added with another device file.
[ 80.886] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 80.886] (II) No input driver specified, ignoring this device.
[ 80.886] (II) This device may have been added with another device file.
[ 80.887] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event14)
[ 80.888] (II) No input driver specified, ignoring this device.
[ 80.888] (II) This device may have been added with another device file.
[ 80.889] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[ 80.889] (II) No input driver specified, ignoring this device.
[ 80.889] (II) This device may have been added with another device file.
[ 80.891] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 80.891] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 80.891] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 80.891] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 80.894] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[ 80.895] (**) Logitech USB Receiver: always reports core events
[ 80.895] (**) Option "Device" "/dev/input/event1"
[ 80.895] (**) Option "_source" "server/udev"
[ 80.897] (II) event1 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 80.897] (II) event1 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.898] (II) event1 - (II) Logitech USB Receiver: (II) device removed
[ 80.898] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:046D:C534.0001/input/input7/event1"
[ 80.898] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 80.898] (**) Option "xkb_model" "pc105"
[ 80.898] (**) Option "xkb_layout" "us"
[ 80.900] (II) event1 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 80.901] (II) event1 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.903] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 80.903] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 80.907] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 80.907] (**) Logitech USB Receiver: always reports core events
[ 80.907] (**) Option "Device" "/dev/input/event2"
[ 80.907] (**) Option "_source" "server/udev"
[ 80.909] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device is a pointer
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device removed
[ 80.910] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[ 80.910] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input8/event2"
[ 80.910] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 80.911] (**) Option "AccelerationScheme" "none"
[ 80.912] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 80.912] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 80.912] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) device is a pointer
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.916] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 80.916] (II) No input driver specified, ignoring this device.
[ 80.916] (II) This device may have been added with another device file.
[ 80.918] (II) config/udev: Adding input device 1.3M HD WebCam: 1.3M HD WebCam (/dev/input/event11)
[ 80.918] (**) 1.3M HD WebCam: 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 80.918] (**) 1.3M HD WebCam: 1.3M HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 80.918] (II) Using input driver 'libinput' for '1.3M HD WebCam: 1.3M HD WebCam'
[ 80.922] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 27 paused 0
[ 80.922] (**) 1.3M HD WebCam: 1.3M HD WebCam: always reports core events
[ 80.922] (**) Option "Device" "/dev/input/event11"
[ 80.922] (**) Option "_source" "server/udev"
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) is tagged by udev as: Keyboard
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device is a keyboard
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device removed
[ 80.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/input/input19/event11"
[ 80.925] (II) XINPUT: Adding extended input device "1.3M HD WebCam: 1.3M HD WebCam" (type: KEYBOARD, id 12)
[ 80.925] (**) Option "xkb_model" "pc105"
[ 80.925] (**) Option "xkb_layout" "us"
[ 80.927] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) is tagged by udev as: Keyboard
[ 80.927] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device is a keyboard
[ 80.929] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.929] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.929] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 80.929] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 80.933] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[ 80.933] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.933] (**) Option "Device" "/dev/input/event0"
[ 80.933] (**) Option "_source" "server/udev"
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 80.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 80.936] (**) Option "xkb_model" "pc105"
[ 80.936] (**) Option "xkb_layout" "us"
[ 80.938] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 80.938] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 80.940] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event3)
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 80.940] (II) LoadModule: "synaptics"
[ 80.941] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.962] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.962] compiled for 1.19.0, module version = 1.9.0
[ 80.962] Module class: X.Org XInput Driver
[ 80.962] ABI class: X.Org XInput driver, version 24.1
[ 80.962] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 80.965] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[ 80.965] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.965] (**) Option "Device" "/dev/input/event3"
[ 80.966] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2320 (res 31)
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 928 (res 31)
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 80.967] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.967] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.967] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event3"
[ 80.967] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.080
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 80.969] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.970] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 80.970] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.971] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 80.971] (II) No input driver specified, ignoring this device.
[ 80.971] (II) This device may have been added with another device file.
[ 80.972] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[ 80.972] (II) No input driver specified, ignoring this device.
[ 80.972] (II) This device may have been added with another device file.
[ 80.973] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[ 80.973] (II) No input driver specified, ignoring this device.
[ 80.973] (II) This device may have been added with another device file.
[ 80.974] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[ 80.974] (II) No input driver specified, ignoring this device.
[ 80.974] (II) This device may have been added with another device file.
[ 80.975] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[ 80.975] (II) No input driver specified, ignoring this device.
[ 80.975] (II) This device may have been added with another device file.
[ 80.976] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9)
[ 80.976] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 80.976] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 80.976] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 80.980] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 30 paused 0
[ 80.980] (**) Acer WMI hotkeys: always reports core events
[ 80.980] (**) Option "Device" "/dev/input/event9"
[ 80.980] (**) Option "_source" "server/udev"
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) device is a keyboard
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) device removed
[ 80.983] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event9"
[ 80.983] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 80.983] (**) Option "xkb_model" "pc105"
[ 80.983] (**) Option "xkb_layout" "us"
[ 80.985] (II) event9 - (II) Acer WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 80.986] (II) event9 - (II) Acer WMI hotkeys: (II) device is a keyboard
[ 80.986] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[ 80.986] (II) No input driver specified, ignoring this device.
[ 80.986] (II) This device may have been added with another device file.
[ 80.987] (II) config/udev: Adding input device (unnamed) (/dev/console)
[ 80.987] (II) No input driver specified, ignoring this device.
[ 80.987] (II) This device may have been added with another device file.
[ 80.987] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[ 80.988] (II) No input driver specified, ignoring this device.
[ 80.988] (II) This device may have been added with another device file.
[ 80.988] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[ 80.988] (II) No input driver specified, ignoring this device.
[ 80.989] (II) This device may have been added with another device file.
[ 80.989] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[ 80.989] (II) No input driver specified, ignoring this device.
[ 80.989] (II) This device may have been added with another device file.
[ 80.990] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[ 80.990] (II) No input driver specified, ignoring this device.
[ 80.990] (II) This device may have been added with another device file.
[ 80.990] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[ 80.990] (II) No input driver specified, ignoring this device.
[ 80.990] (II) This device may have been added with another device file.
[ 80.991] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[ 80.991] (II) No input driver specified, ignoring this device.
[ 80.991] (II) This device may have been added with another device file.
[ 80.992] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[ 80.992] (II) No input driver specified, ignoring this device.
[ 80.992] (II) This device may have been added with another device file.
[ 80.992] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[ 80.992] (II) No input driver specified, ignoring this device.
[ 80.993] (II) This device may have been added with another device file.
[ 80.993] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[ 80.993] (II) No input driver specified, ignoring this device.
[ 80.993] (II) This device may have been added with another device file.
[ 80.994] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[ 80.994] (II) No input driver specified, ignoring this device.
[ 80.994] (II) This device may have been added with another device file.
[ 80.994] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[ 80.994] (II) No input driver specified, ignoring this device.
[ 80.994] (II) This device may have been added with another device file.
[ 80.995] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[ 80.995] (II) No input driver specified, ignoring this device.
[ 80.995] (II) This device may have been added with another device file.
[ 80.996] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[ 80.996] (II) No input driver specified, ignoring this device.
[ 80.996] (II) This device may have been added with another device file.
[ 80.996] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[ 80.996] (II) No input driver specified, ignoring this device.
[ 80.996] (II) This device may have been added with another device file.
[ 80.997] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[ 80.997] (II) No input driver specified, ignoring this device.
[ 80.997] (II) This device may have been added with another device file.
[ 80.998] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[ 80.998] (II) No input driver specified, ignoring this device.
[ 80.998] (II) This device may have been added with another device file.
[ 80.998] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[ 80.998] (II) No input driver specified, ignoring this device.
[ 80.998] (II) This device may have been added with another device file.
[ 80.999] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[ 80.999] (II) No input driver specified, ignoring this device.
[ 80.999] (II) This device may have been added with another device file.
[ 80.999] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[ 80.999] (II) No input driver specified, ignoring this device.
[ 80.999] (II) This device may have been added with another device file.
[ 81.000] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[ 81.000] (II) No input driver specified, ignoring this device.
[ 81.000] (II) This device may have been added with another device file.
[ 81.001] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[ 81.001] (II) No input driver specified, ignoring this device.
[ 81.001] (II) This device may have been added with another device file.
[ 81.001] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[ 81.001] (II) No input driver specified, ignoring this device.
[ 81.001] (II) This device may have been added with another device file.
[ 81.002] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[ 81.002] (II) No input driver specified, ignoring this device.
[ 81.002] (II) This device may have been added with another device file.
[ 81.002] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[ 81.002] (II) No input driver specified, ignoring this device.
[ 81.002] (II) This device may have been added with another device file.
[ 81.003] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[ 81.003] (II) No input driver specified, ignoring this device.
[ 81.003] (II) This device may have been added with another device file.
[ 81.003] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[ 81.003] (II) No input driver specified, ignoring this device.
[ 81.003] (II) This device may have been added with another device file.
[ 81.004] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[ 81.004] (II) No input driver specified, ignoring this device.
[ 81.004] (II) This device may have been added with another device file.
[ 81.006] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[ 81.006] (II) No input driver specified, ignoring this device.
[ 81.006] (II) This device may have been added with another device file.
[ 81.007] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[ 81.007] (II) No input driver specified, ignoring this device.
[ 81.007] (II) This device may have been added with another device file.
[ 81.008] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[ 81.008] (II) No input driver specified, ignoring this device.
[ 81.009] (II) This device may have been added with another device file.
[ 81.009] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[ 81.009] (II) No input driver specified, ignoring this device.
[ 81.009] (II) This device may have been added with another device file.
[ 81.010] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[ 81.010] (II) No input driver specified, ignoring this device.
[ 81.010] (II) This device may have been added with another device file.
[ 81.010] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[ 81.010] (II) No input driver specified, ignoring this device.
[ 81.011] (II) This device may have been added with another device file.
[ 81.011] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[ 81.011] (II) No input driver specified, ignoring this device.
[ 81.011] (II) This device may have been added with another device file.
[ 81.012] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[ 81.012] (II) No input driver specified, ignoring this device.
[ 81.012] (II) This device may have been added with another device file.
[ 81.012] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[ 81.012] (II) No input driver specified, ignoring this device.
[ 81.012] (II) This device may have been added with another device file.
[ 81.013] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[ 81.013] (II) No input driver specified, ignoring this device.
[ 81.013] (II) This device may have been added with another device file.
[ 81.013] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[ 81.013] (II) No input driver specified, ignoring this device.
[ 81.013] (II) This device may have been added with another device file.
[ 81.014] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[ 81.014] (II) No input driver specified, ignoring this device.
[ 81.014] (II) This device may have been added with another device file.
[ 81.015] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[ 81.015] (II) No input driver specified, ignoring this device.
[ 81.015] (II) This device may have been added with another device file.
[ 81.015] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[ 81.015] (II) No input driver specified, ignoring this device.
[ 81.015] (II) This device may have been added with another device file.
[ 81.016] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[ 81.016] (II) No input driver specified, ignoring this device.
[ 81.016] (II) This device may have been added with another device file.
[ 81.016] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[ 81.016] (II) No input driver specified, ignoring this device.
[ 81.016] (II) This device may have been added with another device file.
[ 81.017] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[ 81.017] (II) No input driver specified, ignoring this device.
[ 81.017] (II) This device may have been added with another device file.
[ 81.017] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[ 81.017] (II) No input driver specified, ignoring this device.
[ 81.017] (II) This device may have been added with another device file.
[ 81.018] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[ 81.018] (II) No input driver specified, ignoring this device.
[ 81.018] (II) This device may have been added with another device file.
[ 81.018] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[ 81.019] (II) No input driver specified, ignoring this device.
[ 81.019] (II) This device may have been added with another device file.
[ 81.019] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[ 81.019] (II) No input driver specified, ignoring this device.
[ 81.019] (II) This device may have been added with another device file.
[ 81.020] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[ 81.020] (II) No input driver specified, ignoring this device.
[ 81.020] (II) This device may have been added with another device file.
[ 81.020] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[ 81.020] (II) No input driver specified, ignoring this device.
[ 81.020] (II) This device may have been added with another device file.
[ 81.021] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[ 81.021] (II) No input driver specified, ignoring this device.
[ 81.021] (II) This device may have been added with another device file.
[ 81.021] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[ 81.021] (II) No input driver specified, ignoring this device.
[ 81.022] (II) This device may have been added with another device file.
[ 81.022] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[ 81.022] (II) No input driver specified, ignoring this device.
[ 81.022] (II) This device may have been added with another device file.
[ 81.023] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[ 81.023] (II) No input driver specified, ignoring this device.
[ 81.023] (II) This device may have been added with another device file.
[ 81.023] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[ 81.023] (II) No input driver specified, ignoring this device.
[ 81.023] (II) This device may have been added with another device file.
[ 81.024] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[ 81.024] (II) No input driver specified, ignoring this device.
[ 81.024] (II) This device may have been added with another device file.
[ 81.024] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[ 81.025] (II) No input driver specified, ignoring this device.
[ 81.025] (II) This device may have been added with another device file.
[ 81.025] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[ 81.025] (II) No input driver specified, ignoring this device.
[ 81.025] (II) This device may have been added with another device file.
[ 81.026] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[ 81.026] (II) No input driver specified, ignoring this device.
[ 81.026] (II) This device may have been added with another device file.
[ 81.026] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[ 81.026] (II) No input driver specified, ignoring this device.
[ 81.026] (II) This device may have been added with another device file.
[ 81.027] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[ 81.027] (II) No input driver specified, ignoring this device.
[ 81.027] (II) This device may have been added with another device file.
[ 81.027] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[ 81.027] (II) No input driver specified, ignoring this device.
[ 81.027] (II) This device may have been added with another device file.
[ 81.028] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[ 81.028] (II) No input driver specified, ignoring this device.
[ 81.028] (II) This device may have been added with another device file.
[ 81.029] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[ 81.029] (II) No input driver specified, ignoring this device.
[ 81.029] (II) This device may have been added with another device file.
[ 81.029] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[ 81.029] (II) No input driver specified, ignoring this device.
[ 81.029] (II) This device may have been added with another device file.
[ 81.030] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[ 81.030] (II) No input driver specified, ignoring this device.
[ 81.030] (II) This device may have been added with another device file.
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 81.033] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 81.033] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[ 81.033] (**) Logitech USB Receiver: always reports core events
[ 81.033] (**) Option "Device" "/dev/input/event2"
[ 81.033] (**) Option "_source" "_driver/libinput"
[ 81.033] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[ 81.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input8/event2"
[ 81.034] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16)
[ 81.034] (**) Option "xkb_model" "pc105"
[ 81.034] (**) Option "xkb_layout" "us"
[ 83.607] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 85.700] (II) modeset(0): EDID vendor "AUO", prod id 25042
[ 85.700] (II) modeset(0): Printing DDC gathered Modelines:
[ 85.700] (II) modeset(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 85.804] (II) modeset(0): EDID vendor "AUO", prod id 25042
[ 85.804] (II) modeset(0): Printing DDC gathered Modelines:
[ 85.804] (II) modeset(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 468.523] (**) Option "fd" "19"
[ 468.523] (II) event7 - (II) Power Button: (II) device removed
[ 468.524] (**) Option "fd" "22"
[ 468.524] (II) event10 - (II) Video Bus: (II) device removed
[ 468.530] (**) Option "fd" "23"
[ 468.530] (II) event4 - (II) Power Button: (II) device removed
[ 468.530] (**) Option "fd" "24"
[ 468.531] (II) event5 - (II) Sleep Button: (II) device removed
[ 468.531] (**) Option "fd" "25"
[ 468.531] (II) event1 - (II) Logitech USB Receiver: (II) device removed
[ 468.532] (**) Option "fd" "26"
[ 468.532] (**) Option "fd" "27"
[ 468.532] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device removed
[ 468.533] (**) Option "fd" "28"
[ 468.533] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 468.534] (**) Option "fd" "30"
[ 468.534] (II) event9 - (II) Acer WMI hotkeys: (II) device removed
[ 468.535] (**) Option "fd" "26"
[ 468.535] (II) event2 - (II) Logitech USB Receiver: (II) device removed
[ 468.537] (II) UnloadModule: "libinput"
[ 468.537] (II) systemd-logind: not releasing fd for 13:66, still in use
[ 468.537] (II) UnloadModule: "libinput"
[ 468.537] (II) systemd-logind: releasing fd for 13:73
[ 468.556] (II) UnloadModule: "synaptics"
[ 468.556] (II) systemd-logind: releasing fd for 13:67
[ 468.616] (II) UnloadModule: "libinput"
[ 468.616] (II) systemd-logind: releasing fd for 13:64
[ 468.632] (II) UnloadModule: "libinput"
[ 468.632] (II) systemd-logind: releasing fd for 13:75
[ 468.664] (II) UnloadModule: "libinput"
[ 468.664] (II) systemd-logind: releasing fd for 13:66
[ 468.684] (II) UnloadModule: "libinput"
[ 468.684] (II) systemd-logind: releasing fd for 13:65
[ 468.700] (II) UnloadModule: "libinput"
[ 468.700] (II) systemd-logind: releasing fd for 13:69
[ 468.716] (II) UnloadModule: "libinput"
[ 468.716] (II) systemd-logind: releasing fd for 13:68
[ 468.732] (II) UnloadModule: "libinput"
[ 468.732] (II) systemd-logind: releasing fd for 13:74
[ 468.753] (II) UnloadModule: "libinput"
[ 468.753] (II) systemd-logind: releasing fd for 13:71
[ 469.755] (II) Server terminated successfully (0). Closing log file.

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19352298

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22630288
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19486602

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22654383
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19330253

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22644158
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=19347516

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event6
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=reliable
E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22633560

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19339125

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3:PNP0C0E/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22639132
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=22292191

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event12
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22659524

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0269e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#1/beep0"
E: PRODUCT=1/10ec/269/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=21978828

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/10ec/269:card0/codec#1/beep0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22651790

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=22648269

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event13
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22714532

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=22649579

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event14
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22709125

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
E: LED=1f
E: MODALIAS=input:b0003v046DpC534e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-1/input0"
E: PRODUCT=3/46d/c534/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6940581

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd /dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c534:usb-0000:00:1d.0-1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22634094
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c000 677bfad941dfed 9ed68000004400 10000002
E: MODALIAS=input:b0003v046DpC534e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,r0,1,6,7,8,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-1/input1"
E: PRODUCT=3/46d/c534/111
E: PROP=0
E: REL=1c3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6943810

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/event2
N: input/event2
S: input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c534:usb-0000:00:1d.0-1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22638002
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if01-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if01-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=21111647

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=1.3M_HD_WebCam
E: ID_MODEL_ENC=1.3M\x20HD\x20WebCam
E: ID_MODEL_ID=d250
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: ID_REVISION=0102
E: ID_SERIAL=SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02
E: ID_SERIAL_SHORT=HF1316-A821-HN01-VA-R01.00.02
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SuYin
E: ID_VENDOR_ENC=SuYin
E: ID_VENDOR_ID=064e
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v064EpD250e0102-e0,1,kD4,ramlsfw
E: NAME="1.3M HD WebCam: 1.3M HD WebCam"
E: PHYS="usb-0000:00:1d.7-3/button"
E: PRODUCT=3/64e/d250/102
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=22982162

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22/event15
N: input/event15
S: input/by-id/usb-SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event /dev/input/by-id/usb-SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02-event-if00
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=1.3M_HD_WebCam
E: ID_MODEL_ENC=1.3M\x20HD\x20WebCam
E: ID_MODEL_ID=d250
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: ID_REVISION=0102
E: ID_SERIAL=SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02
E: ID_SERIAL_SHORT=HF1316-A821-HN01-VA-R01.00.02
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SuYin
E: ID_VENDOR_ENC=SuYin
E: ID_VENDOR_ID=064e
E: LIBINPUT_DEVICE_GROUP=3/64e/d250:usb-0000:00:1d.7-3/button
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=23049287
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=10000 c020000000000 0 0 700f02000003 3802078f870f401 febfffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8D,8E,8F,94,95,96,9B,9C,9D,9E,9F,A3,A4,A5,A6,AD,B7,B8,B9,C0,C1,D9,E0,E1,E2,E3,EC,ED,EE,1A9,1B2,1B3,1D0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6039958

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_86=wlan
E: KEYBOARD_KEY_a5=help
E: KEYBOARD_KEY_a6=setup
E: KEYBOARD_KEY_a7=battery
E: KEYBOARD_KEY_a9=switchvideomode
E: KEYBOARD_KEY_b2=www
E: KEYBOARD_KEY_b3=euro
E: KEYBOARD_KEY_b4=dollar
E: KEYBOARD_KEY_ce=brightnessup
E: KEYBOARD_KEY_d4=bluetooth
E: KEYBOARD_KEY_d5=wlan
E: KEYBOARD_KEY_d6=wlan
E: KEYBOARD_KEY_d7=bluetooth
E: KEYBOARD_KEY_d8=bluetooth
E: KEYBOARD_KEY_d9=brightnessup
E: KEYBOARD_KEY_ee=brightnessup
E: KEYBOARD_KEY_ef=brightnessdown
E: KEYBOARD_KEY_f1=f22
E: KEYBOARD_KEY_f2=f23
E: KEYBOARD_KEY_f3=prog2
E: KEYBOARD_KEY_f4=prog1
E: KEYBOARD_KEY_f5=presentation
E: KEYBOARD_KEY_f6=power
E: KEYBOARD_KEY_f8=fn
E: KEYBOARD_KEY_f9=prog1
E: LIBINPUT_ATTR_KEYBOARD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22632448
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio2/input/input6
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio2/input/input6
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="ETPS/2 Elantech Touchpad"
E: PHYS="isa0060/serio2/input0"
E: PRODUCT=11/2/e/0
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=7074760

P: /devices/platform/i8042/serio2/input/input6/event3
N: input/event3
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/platform/i8042/serio2/input/input6/event3
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=29
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=74
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: LIBINPUT_ATTR_PRESSURE_RANGE=10:8
E: LIBINPUT_ATTR_RESOLUTION_HINT=31x31
E: LIBINPUT_DEVICE_GROUP=11/2/e:isa0060/serio2
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22700147

P: /devices/platform/i8042/serio2/input/input6/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio2/input/input6/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=19242090

P: /devices/platform/pcspkr/input/input15
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19465987

P: /devices/platform/pcspkr/input/input15/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input15/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22646836

P: /devices/virtual/input/input17
E: DEVPATH=/devices/virtual/input/input17
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=1c0000 0 0 0 0 1600800000c00 300000 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,CA,CB,E3,ED,EE,F0,212,213,214,ram4,lsfw
E: MSC=10
E: NAME="Acer WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=20677096

P: /devices/virtual/input/input17/event10
N: input/event10
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/virtual/input/input17/event10
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: LIBINPUT_DEVICE_GROUP=19/0/0:wmi
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22641723
E: XKBLAYOUT=us
E: XKBMODEL=pc105


DRM Information from dmesg:
---------------------------


-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.14.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8), LANGUAGE=en_IN:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xserver-xorg depends on:
ii x11-xkb-utils 7.7+3+b1
ii xkb-data 2.19-1.1
ii xserver-xorg-core 2:1.19.6-1
ii xserver-xorg-input-all 1:7.7+19
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.10.5-1
ii xserver-xorg-input-libinput [xorg-driver-input] 0.26.0-1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.2-1+b1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.9.0-1+b1
ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1
ii xserver-xorg-video-all 1:7.7+19
ii xserver-xorg-video-amdgpu [xorg-driver-video] 1.4.0-1
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.3-1+b2
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b5
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.99.917+git20171229-1
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.5-1+b2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.5-1
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.9-1+b2
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.15-2
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.6.0-3
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.5-2
ii xserver-xorg-video-r128 [xorg-driver-video] 6.10.2-1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.9-1
ii xserver-xorg-video-siliconmotion [xorg-driver-vid 1:1.7.9-2
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.7-1
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.7-1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.8-1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.4-1+b2
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.2.1-1+b1

Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 17.3.3-1
ii xserver-xorg-legacy 2:1.19.6-1

xserver-xorg suggests no packages.

-- no debconf information

[gregor herrmann]

Control: severity -1 important
Control: tag -1 + moreinfo

I looked through this bug during the Bern Bug Squashing Party, and
although I'm not in the xorg team, my impression is that the bug is
not actionable in the current state.
The individual messages hint at problems that might be related to the
kernel, to GNOME, or maybe to xorg but with the available information
that's hard to say.

I suggest that the participants try to use one of the support
channels mentioned at https://www.debian.org/support to get help in
narrowing down the problem.

I'm quite sure the bug severity is inflated, as xorg works for many
users without any issues; I'm lowering the severity for now.


Cheers,
gregor

[Debian Bug Tracking System]

Post by gregor herrmann
severity -1 important

Bug #879624 [xorg] xorg: After upgrade to buster: system doesnt start x-server anymore but stop reacting
Severity set to 'important' from 'grave'

Post by gregor herrmann
tag -1 + moreinfo

Bug #879624 [xorg] xorg: After upgrade to buster: system doesnt start x-server anymore but stop reacting
Added tag(s) moreinfo.